UK Trade Tariff
Heading 3921: Other plates, sheets, film, foil and strip, of plastics
-
3921 11Cellular
-
3921 11Of polymers of styrene
- 3921 11 00 10Acrylonitrile butadiene styrene, for use in certain types of aircraftDuty & VAT →
- 3921 11 00 90OtherDuty & VAT →
-
3921 12Of polymers of vinyl chloride
- 3921 12 00 20For use in certain types of aircraftDuty & VAT →
- 3921 12 00 90OtherDuty & VAT →
-
3921 13Of polyurethanes
- 3921 13 10 00FlexibleDuty & VAT →
- 3921 13 90 00OtherDuty & VAT →
-
3921 14Of regenerated cellulose
- 3921 14 00 20Cellular block of regenerated cellulose, impregnated with water containing magnesium chloride and quaternary ammonium compounds, measuring 100 cm (± 10 cm) × 100 cm (± 10 cm) × 40 cm (± 5 cm)Duty & VAT →
- 3921 14 00 80OtherDuty & VAT →
-
3921 19Of other plastics
- 3921 19 00 10For use in certain types of aircraftDuty & VAT →
-
3921 19 00 30Other
- 3921 19 00 30Blocks with cellular structure, containing by weight:- polyamide-6 or poly(epoxy anhydride)- 7% or more but not more than 9% of polytetrafluorethylene if present- 10% or more but not more than 25% of inorganic fillersDuty & VAT →
- 3921 19 00 50Porous membrane of polytetrafluorethylene (ptfe) laminated to a polyester spunbonded non-woven cloth with- a total thickness of more than 0.05 mm but not more than 0.20 mm,- a water entry pressure between 5 and 200 kpa according to iso 811, and- an air permeability of 0.08 cm3/cm2/s or more according to iso 5636-5Duty & VAT →
- 3921 19 00 53Sheets of closed-cell silicone foam with:-a thickness of 2.0 mm or more but not more than 4.8 mm,-a thermal insulation of more than 0.25 km²/w but not more than 0.4 km²/w (according to astm-c518)-a dielectric strength of more than 3.0 kv/mm but not more than 3.8 kv/mm (according to astm- d149) Duty & VAT →
- 3921 19 00 55Strip of microporous polytetrafluoroethylene on a support of a non-woven-wound on a roll on a core of 3 inches,-with a width of 69.5mm, 40.8mm, 36.5mm, 20mm, 13.5mm or 10mmfor use in the manufacture of filters for kidney dialysis equipment and intravenous applicationDuty & VAT →
- 3921 19 00 65Transparent, microporous, acrylic acid grafted polyethylene film, in the form of rolls, for the manufacture of alkaline battery separators with:-a width of 98 mm or more but not more than 170 mm,-a thickness of 15 μm or more but not more than 36 μm,Duty & VAT →
- 3921 19 00 75Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with:-zero transversal production direction (td) shrinkage,-a total thickness of 8 μm or more, but not more than 40 μm,-a width of 15 mm or more, but not more than 900 mm,-a length of more than 200 m, but not more than 8 000 m,-an average pore size between 0.02 μm and 0.1 μm,-whether or not laminated with a polypropylene non-woven mat of 50 to 200 µm thickness,-whether or not coated with surfactant,-whether or not coated on 1 or 2 sides with a ceramic layer of min 1 μm thickness or more, but not more than 5 μm,-whether or not coated on 1 or 2 sides with a sticky binder, pvdf type or similar of min 0.5 μm thickness or more, but not more than 5 μmDuty & VAT →
- 3921 19 00 95Film of polyethersulfone, of a thickness of not more than 200 µmDuty & VAT →
- 3921 19 00 99OtherDuty & VAT →
-
3921 90Other
-
3921 90 10Of condensation or rearrangement polymerisation products, whether or not chemically modified
-
3921 90 10Of polyesters
- 3921 90 10 05Corrugated sheet and platesDuty & VAT →
- 3921 90 10 10Composite plate of poly(ethylene terephthalate) or of poly(butylene terephthalate), reinforced with glass fibresDuty & VAT →
- 3921 90 10 30Multilayer film consisting of:- a poly(ethylene terephthalate) film with a thickness of more than 100 µm but not more than 150 µm,- a primer of phenolic material with a thickness of more than 8 µm but not more than 15 µm,- an adhesive layer of a synthetic rubber with a thickness of more than 20 µm but not more than 30 µm,- and a transparent poly(ethylene terephthalate) liner with a thickness of more than 35 µm but not more than 40 µmDuty & VAT →
- 3921 90 10 90OtherDuty & VAT →
- 3921 90 30 00Of phenolic resinsDuty & VAT →
-
3921 90 41Of amino-resins
-
3921 90 41Laminated
- 3921 90 41 00High-pressure laminates with a decorative surface on one or both sidesDuty & VAT →
- 3921 90 43 00OtherDuty & VAT →
- 3921 90 49 00OtherDuty & VAT →
-
3921 90 55Other
- 3921 90 55 25Prepreg sheets or rolls containing polyimide resinDuty & VAT →
- 3921 90 55 35Glass fibre impregnated with epoxy resin for use in the manufacture of smart cardsDuty & VAT →
- 3921 90 55 40Three layered fabric sheet, in rolls,- comprising a core layer of 100% nylon taffeta or nylon/polyester blended taffeta,- coated on both sides with polyamide ,- of a total thickness not more than 135 μm,- of a total weight not more than 80 g/m2Duty & VAT →
- 3921 90 55 70Membrane composed of a polyamide layer and a polysulfone layer on a polyethylene terephthalate support layer with:-a total thickness of 0.25 mm or more but not more than 0.40 mm,-a total weight of 109 g/m² or more but not more than 114 g/m²Duty & VAT →
- 3921 90 55 90OtherDuty & VAT →
-
3921 90 60Of addition polymerisation products
- 3921 90 60 10For use in certain types of aircraftDuty & VAT →
- 3921 90 60 90OtherDuty & VAT →
- 3921 90 90 00OtherDuty & VAT →