UK Trade Tariff
Heading 8482: Ball or roller bearings
-
8482 10Ball bearings
-
8482 10 10With greatest external diameter not exceeding 30 mm
- 8482 10 10 15Ball bearings with:-an internal diameter of 4 mm or more but not more than 9 mm,-an external diameter of not more than 26 mm,-a width of not more than 8 mm,for use in the manufacture of electromotors with a range of 40 000 rpm or more but not more than 80 000 rpmDuty & VAT →
- 8482 10 10 90OtherDuty & VAT →
- 8482 10 90 00OtherDuty & VAT →
- 8482 20 00 00Tapered roller bearings, including cone and tapered roller assembliesDuty & VAT →
- 8482 30 00 00Spherical roller bearingsDuty & VAT →
- 8482 40 00 00Needle roller bearings, including cage and needle roller assembliesDuty & VAT →
-
8482 50Other cylindrical roller bearings, including cage and roller assemblies
- 8482 50 00 20Axial roller bearing made of steel:-the retainer is made of cold-rolled steel with a carbon content of up to 0.25 percent, complying with standard astm a109-98,-the rollers are made of anti-friction steel according to astm 295-94,-with an external diameter of 63 mm or more but not more than 66 mm,-with an internal diameter of 44 mm or more but not more than 46 mm,-with a weight of 23 g or more but not more than 27 g,-with 36 rollers or more but not more than 38 rollersDuty & VAT →
- 8482 50 00 90OtherDuty & VAT →
-
8482 80Other, including combined ball/roller bearings
- 8482 80 00 10Connecting components for use in the production of helicopter tail rotor shaftsDuty & VAT →
- 8482 80 00 90OtherDuty & VAT →
-
8482 91Parts
-
8482 91Balls, needles and rollers
- 8482 91 10 00Tapered rollersDuty & VAT →
-
8482 91 90Other
- 8482 91 90 10Rollers with a logarithmic profile and a diameter of 25 mm or more but not more than 70 mm or balls with a diameter of 30 mm but not more than 100 mm,- made of 100cr6 steel or 100crmnsi6-4 steel (iso 3290),- with a deviation of 0.5 mm or less as determined with the fbhmethodfor use in wind turbine industryDuty & VAT →
- 8482 91 90 90OtherDuty & VAT →
-
8482 99Other
- 8482 99 00 30Brass cages with the following characteristics:– continuously or centrifugally cast,– turned,– containing by weight 35% or more, but not more than 38% of zinc,– containing by weight 0.75% or more, but not more than 1.25% of lead,– containing by weight 1.0% or more, but not more than 1.4% of aluminium, and– with a tensile strength of 415 pa or more,of a kind used for the manufacture of ball bearingsDuty & VAT →
- 8482 99 00 60Inner or outer rings made of steel, not hardened or not grinded, outer ring with internal raceway(s), inner ring with external raceway(s), with external diameters of: 14 mm or more but not more than 77 mm for the inner ring, 26 mm or more but not more than 101 mm for the outer ringfor use in the manufacture of bearingsDuty & VAT →
- 8482 99 00 70Male and female parts of cages,- made of flat-rolled steel,- with a diameter of 14.5 mm or more but not more than 420 mm,- the male part including rivets,- the female part including holes,used for manufacturing of deep grove ball bearingsDuty & VAT →
- 8482 99 00 80Punched cages of various diameters,- made of flat rolled steel, - with tensile strength of 270 mpa or more,for the production of tapered roller bearingsDuty & VAT →
- 8482 99 00 90OtherDuty & VAT →